Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario descargar pdf (Pagina 135)

100

101

Customizing RIP Services

117356-E Rev 00

5-5

In both Version 2 modes, RIP checks for a password on all received updates (see

“Supplying a Default Route on an Interface” on page 5-15).

By default RIP sends Version 1 updates. You can use the BCC or Site Manager to

choose Version 2 with or without aggregation of subnet information.

Using the BCC

To specify the RIP version, navigate to a RIP interface prompt (for example, box;

eth 2/2; ip/2.2.2.2/255.255.0.0; rip

) and enter:

version

version

is one of the following:

rip1 (default)

rip2

aggr

For example, the following command causes RIP to send Version 2 updates with

aggregation of subnets:

rip/2.2.2.2# version aggr

rip/2.2.2.2#

Using Site Manager

To specify the RIP version, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

RIP Interfaces

. The IP RIP Interface Configuration

window opens.

4. Click on the RIP interface that you want to

edit.

The parameter values for that interface

appear in the IP RIP Interface

Configuration window.

(continued)

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 361 362

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 135

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring IP, ARP, RIP, and OSPF Services