Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario descargar pdf (Pagina 336)

Configuring IP, ARP, RIP, and OSPF Services

C-6

117356-E Rev 00

Parameter: Export Mask

Path: Configuration Manager > Protocols > IP > Route Filters > RIP > Export Filters

Default: 0.0.0.0

Options: Depends on the address class of the network address

Function: Specifies the range of addresses upon which this filter acts.

Instructions: For example, consider Class B network 172.32.0.0, which allocates the upper 8

bits of the host identification field to the subnet ID, and the final 8 bits to the

host ID. The address mask directs the filtering process to a specific portion of

the IP address. In other words, any IP address that matches the masked portion

of 172.32.0.0 is subject to filtering. If you enter 255.255.0.0 for this parameter,

only the network ID portion of the address will be filtered. If you enter the

mask 255.255.255.0 for this parameter, the network ID and subnet ID portions

of the address will be filtered. If you set the Export Address field to 0.0.0.0 and

set this parameter to 0.0.0.0, then the filter applies to all routes. If you set the

Export Address field to 0.0.0.0 and set this parameter to 255.255.255.255, then

the filter applies to the default route. Enter the appropriate mask in

dotted-decimal notation.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.9.1.4

Parameter: From Protocol

Path: Configuration Manager > Protocols > IP > Route Filters > RIP > Export Filters

Default: Any

Options: Any

RIP

EGP

OSPF

Direct

Static

BGP-3

Function: Identifies the source of the routing information: direct connection, static route,

or RIP-, OSPF-, EGP-, or BGP-3-derived route.

Instructions: Select the appropriate option.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.9.1.5

1 2 ... 331 332 333 334 335 336 337 338 339 340 341 ... 361 362

Sin comentarios

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 336