
Configuring IP, ARP, RIP, and OSPF Services
6-40
117356-E Rev 00
For example, the following command sequence creates OSPF area 0.0.0.0 and
displays area attributes:
ospf# area area-id 0.0.0.0
area/0.0.0.0#
info
area-id 0.0.0.0
area-type non-stub
authentication-type none
stub-metric 1
import-summaries true
nssa-translate-to-5 disabled
nssa-default-originate disabled
nssa-default-propagate disabled
nssa-default-ase-path type1
state enabled
Using Site Manager
To create an OSPF area, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
OSPF/MOSPF
. The OSPF/MOSPF menu opens.
4. Choose
Areas
. The OSPF Areas window opens.
5. Click on
Add
. The OSPF Area Configuration window
opens.
6. Set the
OSPF Area
parameter. Click on
Help
or see the parameter description on
page A-49
.
7. Click on
OK
. You return to the OSPF Areas window.
8. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Comentarios a estos manuales