Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 293

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 292
Site Manager Parameters
117356-E Rev 00
A-53
Area Range Parameters
Parameter: NSSA Def Route Type
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Areas
Default: Type 1
Options: Type 1
|
Type 2
Function: Specifies the path type of the default route for type 7 AS external LSAs.
Instructions: Select Type 2 if you want to set the path type of the default route to type 2.
Otherwise, accept the Type 1 default route type. To use this parameter, you
must first set the NSSA Originate Def Route parameter to Enable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.3.2.1.15
Parameter: Range Net
Path: Configuration Manager > Protocols > IP > OSPF/MOSPF > Areas > Ranges >
Add
Default: None
Options: Any network IP address
Function: Allows you to assign a single network address to a group of subnets. This
network address, together with the subnet mask you provide, specifies the
subnets to be grouped in this area range. Only one link summary advertisement
will be generated for all subnets in this range, rather than one link summary
advertisement for each of the subnets included in that network.
Instructions: Enter the appropriate network IP address in dotted-decimal notation.
MIB Object ID: 1.3.6.14.1.18.3.5.3.2.3.4.1.5
Vista de pagina 292
1 2 ... 288 289 290 291 292 293 294 295 296 297 298 ... 361 362

Comentarios a estos manuales

Sin comentarios