Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 157

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 362
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 156
Customizing RIP Services
117356-E Rev 00
5-27
Using Site Manager
To create an accept policy, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Policy Filters
. The IP policies menu opens.
4. Choose
RIP.
The RIP policies menu opens.
5. Choose
Accept Policies
. The RIP Accept Policy Filters window
opens.
6. Click on
Add
. The RIP Accept IP Policy Filter
Configuration window opens.
7. Set the following parameters:
Name
Action
Route Preference
Rule Precedence
Networks
From Gateway
Received on Interface
Apply Subnet Mask
Click on
Help
or see the parameter
descriptions beginning on page B-2.
8. Click on
OK
. You return to the RIP Accept Policy Filters
window.
9. Click on
Apply
, and then on
Done
. You return to the Configuration Manager
window.
Vista de pagina 156
1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 361 362

Comentarios a estos manuales

Sin comentarios