Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario descargar pdf (Pagina 110)

Configuring IP, ARP, RIP, and OSPF Services

3-48

117356-E Rev 00

Using the BCC

To define a static route, navigate to the global IP prompt (for example, box; ip)

and enter:

static-route address

mask

<ip_mask>

next-hop-address

<next_hop>

destination

is the destination IP address.

ip_mask

is the mask of the destination IP address.

next_hop

is the next-hop IP address.

The static route prompt appears.

The BCC configures a static route with default values for all static route

parameters and displays a static-route-specific prompt. You customize a static

route by modifying static route parameters. Navigate to the static route prompt

and enter:

parameter value

is one of the parameter/value pairs described in Table 3-5.

Note:

When you dynamically create a new static route (for example,

128.10.8.0/255.255.255.0/1), the router may generate the following error

message in the router log file:

# 2: 04/16/99 09:44:24.096 WARNING SLOT 5 IP Code: 56

Error when configuring static route 128.10.8.0/255.255.255.0/1

This message indicates that the static route is not configured at the time stated

because all necessary MIB sets are not completed. Error checking occurs as

each attribute is set. The router code generates the error messages to prevent

misconfigured static routes. You can verify that a static route has been created

correctly by issuing a

get command for the valid attribute in the

wfIpStaticRouteEntry.10.* instance.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 361 362

Sin comentarios

Avaya Configuring IP, ARP, RIP, and OSPF Services Manual de usuario Pagina 110