
Configuring IP, ARP, RIP, and OSPF Services
5-28
117356-E Rev 00
Supplying Modification Values for a RIP Accept Policy
You can use the BCC or Site Manager to supply values that RIP uses to modify
fields in a RIP update that matches the policy.
Using the BCC
To supply a modification value to an update that matches a policy, navigate to the
policy prompt (for example,
box; ip; rip; accept/pol_1
) and enter:
modify
A modification prompt appears for the policy.
To specify a value, enter:
<parameter> <value>
parameter value
is the parameter/value pair shown in Table 5-2.
For example, the following command sequence specifies an override mask of
255.0.0.0 for accept policy pol_1:
accept/pol_1/rip#
modify
modify/rip/accept/pol_1#
mask 255.0.0.0
modify/rip/accept/pol_1#
Table 5-2. BCC Modification Parameter for RIP Accept Policies
Parameter Values Function
mask 0.0.0.0 or an IP
mask
Specifies a mask that will override the
interface’s subnet mask in the presence of
networks with variable-length subnet masks
Comentarios a estos manuales