
Customizing RIP Services
117356-E Rev 00
5-13
Using the BCC
To specify a time-to-live value, navigate to a RIP interface prompt (for example,
box; eth 2/2; ip/2.2.2.2/255.255.0.0; rip
) and enter:
ttl
<hops>
hops
is the time-to-live value (expressed as the number of hops) that RIP inserts in
each outbound update.
For example, the following command causes RIP to insert a TTL value of 2 in
each outbound update:
rip/2.2.2.2# ttl 2
rip/2.2.2.2#
Using Site Manager
To specify a time-to-live value, complete the following tasks:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
RIP Interfaces
. The IP RIP Interface Configuration
window opens.
4. Click on the RIP interface that you want to
edit.
The parameter values for that interface
appear in the IP RIP Interface
Configuration window.
5. Set the
Time to Live
parameter. Click on
Help
or see the parameter description on
page A-65
.
6. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
Comentarios a estos manuales