Avaya Configuring Dial Services Manual de usuario Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 428
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
Configuring Dial Services
1-18 114062 Rev. B
Figure 1-15. ISDN Logical Lines Window
Figure 1-15 shows the ISDN Logical Lines window for BRI. For PRI, the
window is similar, but the parameter defaults are different.
8. Accept the defaults by clicking on OK.
You return to the Lines Definition window (refer to Figure
1-4). To modify the
other switch parameters, refer to Chapter 8.
9. Select File > Exit to exit the Lines Definition window.
You return to the Pools window, which shows the configured pools. The
window has three new buttons: Edit, Apply, and Delete.
10. Repeat Steps 1 through 9 to add more lines to the pool.
For backup and bandwidth services, you can select lines across slots.
11. Go to the next section, “Configuring Circuits,” to configure dial-up
circuits.
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 427 428

Comentarios a estos manuales

Sin comentarios