Avaya Configuring Dial Services Manual de usuario Pagina 393

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 428
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 392
Configuration Examples
114062 Rev. B B-17
Dial Backup with Standard on the Primary Line
If the primary circuit uses Bay Networks Standard as the WAN protocol (refer to
Figure B-3), you must configure a unique value for the MAC Address parameter
of the primary IP interface. The router then uses this address as the value of the
MAC Address parameter in the IP adjacent host entry for the remote router.
Routers on each end of the connection require an IP adjacent host entry that
includes the other router’s MAC address.
The previous section, “Dial Backup with PPP on the Primary Line
” explains how
to configure most dial backup parameters, with the exception of the IP parameters
listed in Tables B-
23 and B-24.
Once you configure a MAC address you must configure the IP adjacent host
parameters.
Table B-23. IP Parameter
Parameter
Router 1
S11 (129.122.3.1)
Router 2
S331
(129.122.3.2)
MAC Address 0x000000000001 0x000000000002
Table B-24. IP Adjacent Host Parameters
Parameter
Router 1
S11 (129.122.3.1)
Router 2
S331
(129.122.3.2)
IP Address 129.122.3.2 129.122.3.1
Next Hop Interface Addr 129.122.3.1 129.122.3.2
MAC Address 0x000000000002 0x000000000001
Vista de pagina 392
1 2 ... 388 389 390 391 392 393 394 395 396 397 398 ... 427 428

Comentarios a estos manuales

Sin comentarios