
Configuring Dial Services
A-16 114062 Rev. B
PRI Port Application Mode Parameter
ISDN Switch Parameters
Parameter: Port Application Mode
Path: MCT1 or MCE1 Connector > Port Application
Default: NonPRI
Options: NonPRI
| PRI
Function: Determines if this port is for PRI service. The NonPRI option indicates
that this is a standard synchronous interface. The PRI option indicates
that this is a PRI port.
Instructions: If your application calls for PRI, select PRI. Otherwise, accept the
default.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.3.1.16
Parameter: Switch Type
Path: Dialup > Demand/Backup/Bandwidth On Demand Pools > Pools > Add >
Demand/Backup/Bandwidth On Demand Pool Configuration > OK > Lines
Definition > ISDN/MCT1/MCE1 Connector > ISDN Switch Configuration
Default: BRI NET3
| PRI Net5
Options: BRI NET3
| BRI SWISSNET3 | BRI 5ESS | BRI DMS100 | BRI KDD | BRI
NTT
| BRI TS013 | BRI NI1 | PRI 5ESS | PRI DMS100 | PRI 4ESS | PRI
KDD
| PRI NTT | PRI Net5 | PRI TS014
Site Manager displays only those switch options for the interface you are
configuring. For example, if you are setting up BRI service, you will see only
BRI switch types when you click on Values. In addition, if the router is
communicating with a Version 8.10 router, you will only see BRI switch types
that support Version 8.10 software.
Function: Specifies the type of ISDN switch to which you are connecting.
Instructions: Choose the appropriate ISDN switch. Refer to T
able A-3 on page 17.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.8.6.1.3
Comentarios a estos manuales