
Dial Service Parameters
114062 Rev. B A-51
Parameter: PAP Password
Path: Dialup > Demand Circuit Groups > Demand Circuit Groups > Add Group >
Enter a Demand Pool > OK > Caller Resolution Info
Default: None
Options: Any text string; maximum 25 characters
Function: Specifies the PAP password you assign to this interface. The PAP password is
for identification and security purposes, and must be the same on both sides of
the connection.
During the authentication phase, all Password Authenticate-Request messages
that the calling router sends to the called router must include the correct
password. If the password is not correct, the called router sends an
Authenticate-Negative Acknowledgment (Authenticate-NAK) message and the
router does not activate the connection.
Instructions: If you configured PAP as the authentication protocol, specify a unique PAP
password. If not, ignore this parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.3.1.5
Comentarios a estos manuales