
Configuring Dial Services
1-10 114062 Rev. B
6. Click on OK to accept the line media default, Raise DTR.
At this point, you may want to select V.25bis or Hayes as the line media type
rather than accept the default.
For Hayes signaling, you need to specify a modem initialization string for
modem dialing (refer to Chapter 8 to modify modem parameters). For both
options, you need to configure an outgoing phone list (refer to “Creating an
Outgoing Phone List” on page 1-36).
You return to the Lines Definition window. The letter D (demand), B
(backup), or W (bandwidth) appears next to the COM port to indicate what
type of line it is. Note that the router can use the same line for all three types
of pools. Asynchronous ports have an at sign (@) next to the connector name.
7. Select and configure more lines for the pool, if necessary.
8. Select File > Exit to exit the Lines Definition window (refer to Figure 1-4).
You return to the Pools window with three new buttons (Edit, Apply, and
Delete) that allow you to edit the new pool.
9. Now that you have set up a pool, do one of the following:
• Go to “Confi
guring Circuits” on page 1-19 to configure dial-up circuits.
• Go to the next section to add ISDN lines to the pool.
Site Manager: Line Media Type parameter: page A-5
Comentarios a estos manuales