Avaya Configuring Dial Services Manual de usuario Pagina 35

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 428
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 34
Getting Started
114062 Rev. B 1-5
Configuring Line Pools
A line pool is a group of one or more lines that reside on the router slots. You
identify each pool by assigning a pool ID. The lines are the physical connections
over which the circuits transmit and receive data. Each line can connect to a
modem or directly to an ISDN network (using a router with integral ISDN). A line
pool can have a combination of synchronous and asynchronous interface types.
The steps for creating line pools are the same for all three dial services. The steps
for adding modem lines (Raise DTR, V.25bis, and Hayes) and ISDN lines to a
pool are different. Refer to the appropriate section for instructions:
•“Creating Line Pools
with Modem Lines
•“Creating Line Pools with ISDN
Lines” on page 1-11
Creating Line Pools with Modem Lines
To configure line pools with Raise DTR, V.25bis, and Hayes interfaces:
1. From the Configuration Manager window, select Dialup > Demand Pools,
Backup Pools, or Bandwidth On Demand Pools (Figur
e 1-1).
Figure 1-1. Dialup Menu from the Configuration Manager Window
Vista de pagina 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 427 428

Comentarios a estos manuales

Sin comentarios