Avaya Configuring Dial Services Manual de usuario Pagina 380

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 428
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 379
Configuring Dial Services
B-4 114062 Rev. B
After you configure the line media type parameters, return to the Configuration
Manager window.
Demand Circuit Configuration
Once the demand pool is configured, configure the demand circuits. Select
Dialup > Demand Circuits. Site Manager displays the Demand Pools window.
Click on PPP Circuits. Site Manager displays the PPP Demand Circuits window.
The PPP Demand Circuits window has a Protocols button in the top left corner.
Select Protocols > Add/Delete to configure protocols for the demand circuit. In
this example, IP is the only protocol configured.
Path: Protocols > Select Protocols
Path: IP > IP Adjacent Host
Path: IP Adjacent Host > PPP Demand Circuits
Table B-3. IP Parameters
Parameter
Router 4
(S25)
Router 7
(S23)
IP Address 150.1.1.2 150.1.1.1
Subnet Mask 255.255.255.0 255.255.255.0
Table B-4. IP Adjacent Host Parameter
Parameter
Router 4
(S25)
Router 7
(S23)
IP Adjacent Host 150.1.1.1 150.1.1.2
Table B-5. PPP Demand Circuits Parameters
Parameter
Router 4
(S25)
Router 7
(S23)
CHAP Local Name BLN1 (case-sensitive) BLN2 (case-sensitive)
CHAP Secret East (case-sensitive) East (case-sensitive)
Connection Mode Default
(Collision Master)
Collision Slave
Vista de pagina 379
1 2 ... 375 376 377 378 379 380 381 382 383 384 385 ... 427 428

Comentarios a estos manuales

Sin comentarios