
Configuring Dial Services
1-16 114062 Rev. B
Select B Channel from the menu. The configured timeslot should read
B channel. Repeat the procedure for each timeslot you want to configure.
7. Click on OK.
You return to the PRI Logical Lines window.
8. Accept the default MTU size.
9. Click on Done.
Adding ISDN Lines to a Pool
To add ISDN BRI or PRI lines to a pool:
1. Begin at the Configuration Manager window (refer to Figure 1-1).
2. Select Dialup > Demand Pools, Backup Pools, or Bandwidth On Demand
Pools.
Site Manager displays a Pools window similar to Figure
1-2 on page 1-6.
3. Click on Add.
Site Manager displays the Pool Configuration window (refer to Figure
1-3 on
page
1-6).
4. Enter a pool ID and click on OK.
Site Manager displays the Lines Definition window (refer to Figure
1-4).
5. Click on a previously configured ISDN, MCT1, or MCE1 port.
Site Manager displays the ISDN Switch Configuration window (Figure
1-14).
Site Manager: Demand/Backup/Bandwidth Pool ID parameter: page A-4
Comentarios a estos manuales