Avaya Configuring Dial Services Manual de usuario Pagina 293

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 428
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 292
Dial Service Parameters
114062 Rev. B A-23
Parameter: BRI T4 Timer
Path: ISDN Connector > ISDN Dialup > Edit D Chan >
BRI Interface Configuration
Default: 750 milliseconds
Range: 500 to 1000 milliseconds
Function: Indicates the amount of time the router waits for the line to recover from a
deactivated state. This timer prevents brief, minor disturbances on a noisy line
from forcing the router to deactivate the circuit. Instead, the router waits to see
if the line recovers within the T4 timer period. This enables the router to
suppress minor line problems from the upper-layer protocols.
Instructions: Enter a time limit that the router waits for the line to recover before it
deactivates the circuit. If your line is noisy, enter the maximum time for the
router to wait for the line to reactivate.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.8.9.1.15
Parameter: BRI B Channel Loopback
Path: ISDN Connector > ISDN Dialup > Edit D Chan >
BRI Interface Configuration
Default: Disable
Options: Enable
| Disable
Function: This parameter is for Layer 1 ISDN BRI conformance testing. It allows the
external equipment to send data to the router over the B channels and loop it
right back out the S/T interface. The external equipment can verify its physical
connection to the router.
Instructions: Select Enable if you want to run a loopback test between the network and the
S/T interface on the router. Do not enable this parameter when the router is in
normal operational mode.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.8.9.1.13
Vista de pagina 292
1 2 ... 288 289 290 291 292 293 294 295 296 297 298 ... 427 428

Comentarios a estos manuales

Sin comentarios