
Configuration Examples
114062 Rev. B B-19
Configuration of Router 2
To configure Router 2:
1. Configure a leased, synchronous interface named S12.
2. Select PPP as the WAN protocol.
3. Select IP/RIP as the LAN protocol and configure the interface as follows:
• IP Address: 140.1.1.2
• Subnet Mask: 255.255.255.0
• IP Adjacent Host Address: 140.1.1.1
4. From the Configuration Manager window, click on an ISDN1 connector.
5. Follow the path to the configuration windows and set the parameters
according to Tables B-
25 through B-32.
Port Application Mode Configuration
First, configure the port application mode.
Path: ISDN1 connector > Port Application
Note: These tables list only the parameter defaults you must change.
Table B-25. Port Application Parameter
Parameter
Router 1
(S131)
Router 2
(S12)
Port Application Mode Default
(Dialup - 2B + D)
Default
(Dialup - 2B + D)
Comentarios a estos manuales