
Dial Service Parameters
114062 Rev. B A-25
Parameter: TEI Type for X.25 over ISDN-D
Path: ISDN Connector > ISDN Dialup > Edit D Chan >
BRI Interface Configuration
Default: Fixed
Options: Fixed
| Auto
Function: Specifies how you choose to configure the TEI value for the DTE. You can
preassign the identifier value at the time you order ISDN service or the router
can learn the value from the switch dynamically when you place a call and the
line becomes active. Either way, the switch assigns this value. This parameter is
available only if you enable X.25 over the D channel.
Instructions: Select Fixed to enter the identifier assigned by the switch before placing any
calls. Select Auto so the router learns the identifier dynamically once the line is
active.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.8.9.1.40
Parameter: TEI Value for X.25 over ISDN-D
Path: ISDN Connector > ISDN Dialup > Edit D Chan >
BRI Interface Configuration
Default: 1
Range: 0 to 63
Function: Assigns a number to the X.25 DTE to identify it to the ISDN switch. This
parameter is available only if you enable X.25 over the D channel for a fixed
TEI type.
Instructions: If you set the TEI type to Fixed, enter the TEI value that the switch provider
assigned when you ordered ISDN service. The value must be in the range
0 to 63. If the TEI type is set to Auto, ignore this parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.8.9.1.41
Comentarios a estos manuales