Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 90)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

5-32

308628-14.00 Rev 00

• Maximum holddown time. If the route remains suppressed after the number of

minutes that you specify, BGP unsuppresses it (even if the penalty value

exceeds the threshold). This action does not change the penalty value.

• Memory limit. If the status of the route remains unchanged, either reachable

or unreachable, after the number of minutes that you specify, BGP

unsuppresses the route (if it is suppressed) and resets the penalty value and

flap count to 0.

BGP provides a default template. You can also use the BCC or Site Manager to

create a route flap dampening template and a BGP accept policy for route flap

dampening.

Using the BCC

To create a route-flap-dampening template, navigate to the global BGP prompt

and enter:

damping-template name

<name>

name

is a unique name identifying the template.

A template-specific prompt appears.

For example, the following command creates a route-flap-dampening template

named steady.

/jointfilesconvert/106988/bgp# damping-template name steady

damping-template/steady#

To define the parameters of a template you created, navigate to the

template-specific prompt and enter:

parameter value

is one of the combinations described in Table 5-6.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 307 308

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 90