
Site Manager Parameters
308628-14.00 Rev 00
A-3
Parameter: BGP Identifier
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: None
Options: An IP address of an IP interface on this router
Function: Identifies the BGP router. There is no default for this parameter. You must use
an IP address of one of the router’s IP interfaces.
Instructions: Either accept the current BGP identifier or enter a new IP address. The BGP
identifier must be one of the router’s IP interfaces. If both BGP and OSPF are
running on the router, then the OSPF router ID must be equivalent to one of the
configured IP interfaces.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.4
Parameter: BGP Local AS
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: The current BGP Local AS value
Options: 1 to 65,535
Function: Identifies the autonomous system to which this BGP router belongs.
Instructions: Either accept the current BGP Local AS value or enter a new value for this
parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.5
Parameter: BGP Intra-AS
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether BGP will perform intra-AS IBGP routing.
Instructions: Transit ASs should use intra-AS routing. Stub or multihomed ASs usually do
not use IBGP intra-AS routing.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.8
Comentarios a estos manuales