Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 202)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

A-26

308628-14.00 Rev 00

Parameter: Enable

Path: Configuration Manager > Protocols > IP > EGP > Neighbors

Default: Enable

Options: Enable

Disable

Function: Enables or disables an EGP neighbor relationship with the specified IP address.

Instructions: Set this parameter to Disable if you want to temporarily disable this neighbor

relationship rather than delete it. Or set it to Enable if you previously disabled

this neighbor relationship, and now want to reenable it.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.4.3.1.2

Parameter: Acquisition Mode

Path: Configuration Manager > Protocols > IP > EGP > Neighbors

Default: Passive

Options: Passive

Active

Function: Specifies which of the two neighbors initiates EGP connections. The router in

the active mode is the initiator.

Instructions: Set this parameter to Active if you want the local EGP neighbor to be the

initiator of EGP connections. Otherwise, accept the default value, Passive.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.4.3.1.7

Parameter: Poll Mode

Path: Configuration Manager > Protocols > IP > EGP > Neighbors

Default: Both

Options: Active

Passive

Both

Function: Specifies the type of neighbor reachability algorithm this local EGP neighbor

executes. In the active mode, a router sends hello and poll messages to request

reachability status from its neighbor. In the passive mode, a router responds to

hello and poll messages with I-H-U and update messages.

Instructions: Accept the default value, Both, or set to either Active or Passive (depending on

the neighbor reachability algorithm you want this router to execute).

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.4.3.1.8

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 307 308

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 202