Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 62

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 308
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 61
Configuring IP Exterior Gateway Protocols (BGP and EGP)
5-4
308628-14.00 Rev 00
Supplying a BGP Identifier
The BGP identifier is the IP address of an interface on this router.
There is no default for this parameter. You must supply a BGP ID, using the IP
address of one of the router’s IP interfaces.
You can use the BCC or Site Manager to supply a BGP identifier for the router.
Using the BCC
Navigate to the BGP prompt and enter:
router-id
<ip_address>
ip_address
is the address of one of the IP interfaces on the router.
For example, the following command supplies IP address 2.2.2.2 for the BGP
identifier:
/jointfilesconvert/106988/bgp#
router-id 2.2.2.2
/jointfilesconvert/106988/bgp#
Using Site Manager
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
BGP
. The BGP menu opens.
4. Choose
BGP
Global
. The Edit BGP Global Parameters window
opens.
5. Set the
BGP
Identifier
parameter. Click
on
Help
or see the parameter description
on page A-3
.
6. Click on
OK
. Site Manager returns you to the
Configuration Manager window.
Vista de pagina 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 307 308

Comentarios a estos manuales

Sin comentarios