
Configuring IP Exterior Gateway Protocols (BGP and EGP)
5-12
308628-14.00 Rev 00
Using the BCC
Navigate to the BGP prompt and enter:
multi-hop <
state>
state
is one of the following:
enabled
disabled
(default)
For example, the following command enables BGP for multihop peer-to-peer
connections:
/jointfilesconvert/106988/bgp# multi-hop enabled
/jointfilesconvert/106988/bgp#
Using Site Manager
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
BGP
. The BGP menu opens.
4. Choose
BGP Global
. The Edit BGP Global Parameters window
opens.
5. Set the
Multi-hop EBGP Connection
parameter. Click on
Help
or see the
parameter description on page A-5
.
6. Click on
OK
. Site Manager returns you to the
Configuration Manager window.
Comentarios a estos manuales