Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 33

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 308
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 32
308628-14.00 Rev 00
2-1
Chapter 2
Starting BGP Services with the BCC
This chapter describes how to use the BCC to start the following services with a
basic configuration -- that is, a configuration using all available default values.
Starting IP
To start IP on the router, you must:
1. Configure a physical interface on an available slot/connector.
2. Configure an IP interface on the physical interface.
Step 1: Configuring a Physical Interface
To configure a physical interface on a slot and connector, navigate to the top-level
box prompt and enter:
<interface_type>
slot
<slot_number>
connector
<connector_number>
interface_type
is the name of a link module on the router.
slot_number
is the number of the slot on which the link module is located.
connector_number
is the number of a connector on the link module.
Topic Page
Starting IP 2-1
Starting BGP 2-3
Vista de pagina 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 307 308

Comentarios a estos manuales

Sin comentarios