Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 231

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 308
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 230
Site Manager Parameters
308628-14.00 Rev 00
A-55
Parameter: MAC Address
Path: Configuration Manager > Protocols > IP > Adjacent Hosts
Default: None
Options: Depend on the data link you have selected
Function: Specifies the physical address of the adjacent host. This value can be a 48-bit
Ethernet address, a 64-bit SMDS address, an ATM PVC VPI/VCI address, or,
for an ATM SVC, the address of the ATM interface.
Instructions: Enter the MAC address as a 12-digit hexadecimal number. Enter an ATM/
PVC address in the form virtual path identifier/virtual channel identifier -- for
example, 0/32.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.6
Parameter: Host Encapsulation
Path: Configuration Manager > Protocols > IP > Adjacent Hosts
Default: Ethernet
Options: Ethernet
|
SNAP
|
PDN
|
DDN
|
SNAPIP
|
NULL
Function: Specifies the adjacent host’s encapsulation method.
Instructions: Select Ethernet or SNAP (Service Network Access Point) if you are defining a
point-to-point network interface or if the adjacent host resides on an Ethernet.
For an X.25 interface, select PDN or DDN. For an adjacent host on an ATM
logical IP subnet, select SNAP. (SNAPIP and NULL also specify host
encapsulation methods for ATM networks.)
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.7
Vista de pagina 230
1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 307 308

Comentarios a estos manuales

Sin comentarios