
Configuring and Customizing BGP
308628-14.00 Rev 00
5-9
Setting the Update Interval Timer
BGP injects external BGP routes into the routing table. The default minimum
interval between route injections is 5 seconds.
You can use the BCC or Site Manager to specify the minimum number of seconds
between route injections.
Using the BCC
Navigate to the BGP prompt and enter:
inject-time
<
seconds>
seconds
is the minimum interval between route injections.
For example, the following command causes BGP to inject external BGP routes
into the routing table with a minimum interval of 10 seconds:
/jointfilesconvert/106988/bgp#
inject-time 10
/jointfilesconvert/106988/bgp#
Using Site Manager
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
BGP
. The BGP menu opens.
4. Choose
BGP Global
. The Edit BGP Global Parameters window
opens.
5. Set the
BGP Interval Timer
parameter.
Click on
Help
or see the parameter
description on page A-4
.
6. Click on
OK
. Site Manager returns you to the
Configuration Manager window.
Comentarios a estos manuales