Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 57

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 308
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 56
Configuring and Customizing IP for BGP
308628-14.00 Rev 00
4-13
Using Site Manager
Defining a Static Default Route
If IP receives a data packet with a destination address that it is unable to match in
its routing table, it looks for a default route that it can use to forward the packet.
To include a default route in the routing table, create a static route with a
destination address of 0.0.0.0. For the next-hop address, specify a router that can
forward the packet to its destination.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Static Routes
. The IP Static Routes window opens.
4. Click on
Add
. The IP Configuration window opens.
5. Set the following parameters:
Destination IP Address
Address Mask
Cost
Next Hop Addr
Next Hop Mask
Preference
Unnumbered CCT Name
Click on
Help
or see the parameter
descriptions beginning on page A-51
.
6. Click on
OK
. Site Manager returns you to the IP Static
Routes window.
Vista de pagina 56
1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 307 308

Comentarios a estos manuales

Sin comentarios