
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-10
308628-14.00 Rev 00
BGP-3 Global Parameter
BGP-4 Global Parameter
BGP Peer Parameters
Parameter: Enable
Path: Configuration Manager > Protocols > IP > BGP > BGP-3 Global
Default: Enable
Options: Enable
|
Disable
Function: Globally enables or disables BGP-3 on all router interfaces.
Instructions: Set to Disable if you want to disable BGP-3 for the entire router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.2.1.2
Parameter: Enable
Path: Configuration Manager > Protocols > IP > BGP > BGP-4 Global
Default: Enable
Options: Enable
|
Disable
Function: Globally enables or disables BGP-4 on all router interfaces.
Instructions: Set to Disable if you want to disable BGP-4 for the entire router.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.3.1.2
Parameter: Peer Address
Path: Configuration Manager > Protocols > IP > BGP > Peers
Default: None
Options: Any IP address
Function: Specifies the IP address of the interface on the remote side of this BGP peer
connection.
Instructions: Enter the IP address in dotted-decimal notation. If the peer is in a remote AS,
the address must be on the same subnet as the local interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.6
Comentarios a estos manuales