Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 111)

Establishing a Peer-to-Peer Session

308628-14.00 Rev 00

6-17

Using Site Manager

Disabling and Reenabling Loop Detection

By default, BGP terminates a peer-to-peer session if it discovers a loop in the AS

path.

You can use the BCC or Site Manager to disable and reenable loop detection.

Using the BCC

Navigate to a BGP peer prompt and enter:

detect-as-loop

state>

state

is one of the following:

enabled

(default)

disabled

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BGP

. The BGP menu opens.

4. Choose

Peers

. The IP Interface List for BGP window

opens.

5. Click on the IP interface for which you

want to edit BGP peer parameters.

6. Click on

BGP Peers

. The BGP Peer List window opens.

7. Click on the peer for which you want to

edit parameters.

The parameters for that peer appear in

the window.

8. Set the

Peer Route Echo Switch

parameter. Click on

Help

or see the

parameter description on page A-16

9. Click on

Apply

, and then click on

Done

. Site Manager returns you to the IP

Interface List for BGP window.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 307 308

Comentarios a estos manuales

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 111

Comentarios a estos manuales

Relacionado con productos y manuales para Software Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP)