
Configuring IP Exterior Gateway Protocols (BGP and EGP)
10-6
308628-14.00 Rev 00
Customizing EGP on the Router
You customize EGP on the router by setting EGP global parameters as described
under the following topics:
Enabling and Disabling EGP
When you start EGP on the router, EGP is automatically enabled for operation.
You can use Site Manager to disable and reenable EGP.
Topic Page
Enabling and Disabling EGP
10-6
Supplying a Local AS Number 10-7
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
EGP
. The EGP menu opens.
4. Choose
Global
. The Edit EGP Global Parameters window
opens.
5. Set the
Enable
parameter.
Click on
Help
or see the parameter description on page
A-24
.
The Values Selection window opens.
6. Click on
OK
. Site Manager returns you to the
Configuration Manager window.
Comentarios a estos manuales