Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 252)

Configuring IP Exterior Gateway Protocols (BGP and EGP)

B-18

308628-14.00 Rev 00

Parameter: BGP Community to accept

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept

Policies

Default: An empty list

Options: A list of BGP communities

Function: Specifies one or more BGP communities. This list identifies which communities

are associated with this rule.

Instructions: Supply an octet string using the following format: each community ID is 4 bytes

long; 0 in the two most significant bits causes the router to perform the match on

the lower 16 bits; the default empty list means “accept any list.”

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.24

Parameter: BGP Community attribute action

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept

Policies

Default: As Is

Remove

Append

Replace

Options: A list of BGP communities

Function: Specifies one or more BGP communities. This policy applies to all BGP

advertisements that match the list.

Instructions: Supply an octet string using the following format: each community ID is 4 bytes

long; 0 in the two most significant bits causes the router to perform the match on

the lower 16 bits; the default empty list means “match any list.”

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.25

Parameter: Route Flap Dampening

Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept

Policies

Default: Enable

Options: Enable

Disable

Function: Enables or disables route flap dampening on this accept policy.

Instructions: To enforce route flap dampening on the routes specified by this accept policy,

set this parameter to Enable; otherwise, accept the default, Disable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.26

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 307 308

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 252