Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 227)

Site Manager Parameters

308628-14.00 Rev 00

A-51

Static Route Parameters

Parameter: Enable

Path: Configuration Manager > Protocols > IP > Static Routes

Default: This parameter defaults to Enable when you configure the static route.

Options: Enable

Disable

Function: Specifies the state (active or inactive) of the static route record in the IP

routing tables.

Instructions: Select Disable to make the static route record inactive in the IP routing table;

the IP router will not consider this static route. Select Enable to make the

static route record active again in the IP routing table.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.2

Parameter: Destination IP Address

Path: Configuration Manager > Protocols > IP > Static Routes

Default: None

Options: Any valid IP network address

Function: Specifies the IP address of the network to which you want to configure the

static route. Specifies a supernet for which you want to configure a black hole

static route.

Instructions: Enter the destination IP address in dotted-decimal notation. To configure a

default route, enter 0.0.0.0. To configure a black hole static route, enter a

supernet address. You can configure up to 12 static routes to the same

destination.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.5.1.3

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 307 308

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 227