
Configuring IP Exterior Gateway Protocols (BGP and EGP)
5-16
308628-14.00 Rev 00
Using the BCC
Navigate to the BGP prompt and enter:
subnet-aggregation <
state>
state
is one of the following:
enabled (default)
disabled
For example, the following BCC command disables subnet aggregation:
/jointfilesconvert/106988/bgp# subnet-aggregation disabled
/jointfilesconvert/106988/bgp#
Using Site Manager
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
BGP
. The BGP menu opens.
4. Choose
BGP Global
. The Edit BGP Global Parameters window
opens.
5. Set the
Aggregate Subnets
parameter.
Click on
Help
or see the parameter
description on page A-7
.
6. Click on
OK
. Site Manager returns you to the
Configuration Manager window.
Comentarios a estos manuales