
Routing Policies
308628-14.00 Rev 00
B-15
Parameter: Route Origin
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept
Policies
Default: Any
Options: Any
|
IGP
|
EGP
|
IGP or EGP
|
Incomplete
|
Incomplete or IGP
|
Incomplete
or EGP
Function: Specifies which values of the BGP origin attribute apply to this policy.
Instructions: Select the origin values you wish to accept for this policy.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.13
Parameter: Aggregator AS List
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 >BGP-4 >
Accept Policies
Default: An empty list
Options: A list of AS numbers
Function: Specifies one or more autonomous systems. This policy applies to BGP
advertisements that contain in their Aggregator path attribute an AS number on
this list.
Instructions: To specify that the policy applies to BGP advertisements with any AS number
in the Aggregator path attribute, use the default empty list.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.14
Parameter: Aggregator Router List
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept
Policies
Default: An empty list
Options: A list of IP addresses
Function: Specifies one or more BGP routers. This policy applies to BGP advertisements
that contain in their Aggregator path attribute an IP address on this list.
Instructions: To specify that this policy applies to BGP advertisements with any router
address in the Aggregator path attribute, use the default empty list.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.15
Comentarios a estos manuales