Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 86

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 308
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 85
Configuring IP Exterior Gateway Protocols (BGP and EGP)
5-28
308628-14.00 Rev 00
Best-Route Selection
BGP uses the rules in Table 5-4 as tie breakers to select the best BGP route. This
table lists the rules in the order in which they are evaluated.
Using the BCC
Navigate to the BGP global prompt and enter:
local-pref-calculation
<
state>
state
is one of the values shown in Table 5-5.
Table 5-4. Best-Route Selection Rules
Default Preference Tie-Breaker Rules Calculated Preference Tie-Breaker Rules
1. Choose the route with the lower route weight.
2. Choose the route with the higher local preference
attribute.
3. Choose the route with the lower multiexit
discriminator (MED) attribute (if both routes
include this optional attribute).
4. Choose the route with the lower interior cost to
the next hop.
5. Choose external BGP over IBGP.
6. Choose the route with the lower BGP identifier.
7. Choose the route with the lower BGP connection
remote address.
8. Choose the route with the lower BGP connection
local address.
1. If the next hop is inaccessible, do not consider it.
2. Consider larger BGP administrative weights first.
3. If the routers have the same weight, consider the
route with the highest local preference.
4. If the routes have the same local preference,
prefer the route that the local router originated.
5. If no route was locally originated, prefer the
shorter AS path.
6. If the routes have the same AS path length,
prefer the lowest origin code (IGP is preferred
over EGP, which is preferred over incomplete).
7. If the origin codes are the same and all paths
come from the AS, prefer the path with the lowest
multiexit discriminator (MED) metric. Treat a
missing MED metric as 0.
8. If the MED metrics are the same, prefer external
paths over internal paths.
9. If IGP synchronization is disabled and only
internal paths remain, prefer the path through the
closest neighbor.
10. Prefer the route with the lowest IP address value
for the BGP router ID.
Vista de pagina 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 307 308

Comentarios a estos manuales

Sin comentarios