Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 214

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 308
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 213
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-38
308628-14.00 Rev 00
Parameter: SMDS Arp Request Address
Path: Configuration Manager > Protocols > IP > Interfaces
Default: The SDMS-configured address
Options: A complete SMDS E.164 address specified by the SMDS subscription
agreement that you have with your SMDS provider
Function: Provides an address-resolution multicast address for this IP interface in an
SMDS network. This parameter is displayed only if this is an SMDS circuit.
Instructions: Enter an entire E.164 address -- for example, E1 617 555 1212 FFFF. If you do
not supply an address, IP uses the SDMS-configured address. To configure this
parameter for a multinet or multigroup configuration, see Configuring SMDS.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.21
Parameter: FRB Broadcast
Path: Configuration Manager > Protocols > IP > Interfaces
Default: 0
Options: Any decimal number
Function: Provides a broadcast address for this IP interface in a frame relay network. If
you enter a value for this parameter, the frame relay switch, rather than the
router, will broadcast the message. This parameter is displayed only if this is
a frame relay circuit.
Instructions: Enter the broadcast address provided by the frame relay subscription
agreement.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.22
Vista de pagina 213
1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 307 308

Comentarios a estos manuales

Sin comentarios