
Configuring IP Exterior Gateway Protocols (BGP and EGP)
8-10
308628-14.00 Rev 00
When the session-specific prompt appears, enter the following command:
peer-mode none
For example, the following command sequence defines a peer-to-peer session
between an RR client and a route reflector (represented by addresses 2.2.2.2 and
2.2.2.3):
ip# /jointfilesconvert/106988/bgp
/jointfilesconvert/106988/bgp# peer local 2.2.2.2 remote 2.2.2.3 as 2
peer/2.2.2.2/2.2.2.3# peer-mode none
peer/2.2.2.2/2.2.2.3#
Comentarios a estos manuales