Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 37

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 308
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 36
308628-14.00 Rev 00
3-1
Chapter 3
Starting BGP and EGP Services with Site Manager
This chapter describes how to use Site Manager to start the following IP services
using a basic configuration -- that is, a configuration using only default values.
Starting IP and BGP
You must start BGP as part of starting IP. Before you can select a protocol to run
on the router, you must configure a circuit that the protocol can use as an interface
to an attached network. For information and instructions, see Configuring WAN
Line Services and Configuring Ethernet, FDDI, and Token Ring Services.
The instructions in this chapter show you how to start IP and BGP using default
values.
Topic Page
Starting IP and BGP 3-1
Starting EGP 3-4
Using the Circuitless IP Interface 3-6
Configuring an Unnumbered IP Interface 3-7
Vista de pagina 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 307 308

Comentarios a estos manuales

Sin comentarios