Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario descargar pdf (Pagina 187)

Site Manager Parameters

308628-14.00 Rev 00

A-11

Parameter: Peer AS

Path: Configuration Manager > Protocols > IP > BGP > Peers

Default: None

Options: 1 to 65535

Function: Identifies the autonomous system to which the BGP router at the remote end of

this BGP peer connection belongs.

Instructions: Enter the appropriate AS number.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.10

Parameter: Local Address

Path: Configuration Manager > Protocols > IP > BGP > Peers

Default: None

Options: Any IP address

Function: Specifies the IP address of the interface on the local side of this BGP peer

connection.

Instructions: Enter the appropriate address.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.4

Parameter: Peer Mode

Path: Configuration Manager > Protocols > IP > BGP > Peers

Default: None

Options: None

Internal

External

Function: Indicates the route reflector mode of the remote BGP peer.

Instructions: If the peer is a node, use the default, None.

If the peer is a route reflector in the same cluster, specify Internal.

If the peer is a route reflector in a different cluster, specify External.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.2.1.35

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 307 308

Sin comentarios

Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 187