Avaya Configuring IP Exterior Gateway Protocols (BGP and EGP) Manual de usuario Pagina 183

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 308
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 182
Site Manager Parameters
308628-14.00 Rev 00
A-7
Parameter: Aggregate Subnets
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether subnet routes from non-BGP sources are aggregated to their
corresponding natural network routes for advertisement to BGP peers.
Advertisement of BGP-originated routes is not affected by this switch.
Instructions: Set this parameter as required.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.22
Parameter: Black Hole Routes
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Disabled
Options: Disabled
|
Drop
|
Reject
Function: Specifies whether BGP submits a black-hole route into the routing table for an
aggregate route advertised to a BGP peer.
Instructions: To prevent BGP from submitting a black-hole route into the IP routing table for
a route advertised to a BGP peer, set this parameter to Disabled. To drop a
packet for an unknown destination, set this parameter to Drop. To configure
BGP to return an ICMP destination unreachable message to the sender, set this
parameter to Reject.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.23
Parameter: Route with MED
Path: Configuration Manager > Protocols > IP > BGP > BGP Global
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether BGP considers the Multi-Exit Discriminator attribute in the
route selection process.
Instructions: Set this parameter as required.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.5.1.1.24
Vista de pagina 182
1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 307 308

Comentarios a estos manuales

Sin comentarios