
Configuring IP Exterior Gateway Protocols (BGP and EGP)
5-2
308628-14.00 Rev 00
Enabling and Disabling BGP
When you start BGP on the router, BGP is automatically enabled for both BGP-3
and BGP-4 peer-to-peer connections.
You can use the BCC and Site Manager to disable and reenable BGP on the router.
You can also use Site Manager to disable and reenable BGP-3 and BGP-4.
Using the BCC
Navigate to the BGP prompt and enter:
state
<state>
state
is one of the following:
enabled
(default)
disabled
Configuring BGP Message Logging 5-30
Configuring EBGP Route Flap Dampening 5-31
Topic Page
Comentarios a estos manuales