
Routing Policies
308628-14.00 Rev 00
B-19
Parameter: Route Flap Dampening Template
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept
Policies
Default: default (when the Route Flap Dampening parameter is set to Enable)
Options: Name of a configured route-flap-dampening template
Function: Specifies the name of the configured route-flap-dampening template to apply to
the routes specified by this accept policy.
Instructions: Enter the name of a configured route flap dampening template, or accept the
default template.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.27
Parameter: Multi-Exit Discriminator
Path: Configuration Manager > Protocols > IP > Policy Filters > BGP-4 > Accept
Policies
Default: Passthru
|
Override
|
Generate
|
Delete
Options: Name of a configured route-flap-dampening template
Function: Indicates whether to accept a Multi-Exit Discriminator value for a network
matching this filter, and, if accepted, what value to use. This parameter is valid
only if the value of the Action parameter is accept.
Instructions: Enter the name of a configured route flap dampening template, or accept the
default template.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.9.1.27
Comentarios a estos manuales