
Configuring IP Exterior Gateway Protocols (BGP and EGP)
A-40
308628-14.00 Rev 00
Parameter: Slot Mask
Path: Configuration Manager > Protocols > IP > Interfaces
Default: Slot-mask bit set to 1 (enabling circuitless IP interface support) for every router
slot running IP
Options: For each slot in the router, Site Manager allows you to set the slot-mask bit to 1
(circuitless IP interface support enabled) or 0 (circuitless IP interface support
disabled).
Function: Specifies whether circuitless IP interface support is enabled or disabled on each
slot in the router.
Instructions: If you configured a circuitless IP interface and do not want it to run on certain
slots, set the slot-mask bit to 0 on those slots. Be certain to keep the slot-mask bit
set to 1 on at least one slot running IP; otherwise, the circuitless IP interface will
not initialize. Setting the slot-mask bit parameter to 1 on an empty slot, a slot
containing a system resource module, or a slot with no IP support does not affect
the circuitless IP interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.24.1.27
Comentarios a estos manuales