
62 BCM 5.0 configuration with Business Element Manager
Nortel Business Communications Manager 5.0
Configuration — System
NN40170-501 02.04 Standard
September 2009
Copyright © 2009, Nortel Networks
--End--
Variable definitions
Deleting SNMP Trap Destinations
You can delete SNMP Trap Destinations.
Procedure steps
Step Action
1 Select Configuration > Administrator Access > SNMP.
2 Select the SNMP Trap Destinations tab.
The SNMP Trap Destinations tab appears.
3 In the SNMP Trap Destinations table, select a trap destination.
4 Click Delete.
A confirmation message appears.
5 Click Yes.
--End--
Creating user accounts
Create user accounts to allow specific user to access the BCM 5.0 system.
Procedure steps
Step Action
Variable Value
Name Enter a name for the trap.
Host Enter the IP address of the trap destination.
Port Enter the UDP port number from which the trap will be sent.
The default value is 162.
SNMP version Select the version of the SNMP Agent for the trap. Options are:
v1/v2C, and v3.
Community String Enter the community string to use for the SNMP trap.
User Name For v3 only, enter the user name for the SNMP trap.
Comentarios a estos manuales