Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario descargar pdf (Pagina 48)

48 BCM 5.0 configuration with Business Element Manager

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

Procedure steps

Step Action

1 Select Configuration > System > IP Subsystem.

2 Select the LAN Interfaces tab.

3 Select Customer LAN from the LAN Interfaces Summary. The IP

Configuration pane appears.

4 Click Modify.

5 Enter the IP address.

6 Enter the IP subnet mask.

7 Enter the Default gateway.

8 Click OK.

--End--

Variable definitions

Configuring the modem

Configure the BCM system modem to connect to the system through the

modem.

If you have the appropriate platform privilege, you can remotely dial into BCM

Voicemail and enable the analog modem through any traditional PSTN, ISDN,

or analog trunk. This feature eliminates the need for support personnel to

make site visits to perform management operations.

Prerequisites

• For more information about modem configuration, see Configuration —

Telephony (NN40170-502).

Variable Value

Obtain IP address dynamically If this is selected, the BCM system attempts to use IP address

information from a DHCP server. If this is not selected, you

must enter values for static IP address, IP subnet mask, and

Default gateway.

IP address The IP address of the BCM system.

IP subnet mask The subnet mask used by the BCM system.

Default gateway The gateway used by the BCM system.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 223 224

Sin comentarios

Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario Pagina 48