Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario descargar pdf (Pagina 124)

124 BCM 5.0 music source configuration

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

Procedure steps

Step Action

1 Select Configuration > Applications > Music.

The Music panel appears.

2 From the Music Source list, select Streaming Server.

3 Click Modify. The Streaming Server Settings screen appears.

4 Configure the parameters of the Streaming Server section of the Music

panel.

--End--

Variable definitions

Accessing the Music Manager administration Web page

Select the Music Manager to use the IP Music feature to connect to the music

source available on the BCM. If you select Music Manager, you must configure

the BcmAmp application before you can use it.

Variable Value

Server The IP address of the music source.

Server RTP Port The number of the source port used for the music source. This is

the port the BCM uses to receive music from the music source.

Default port: 2216

Stream Type The codec that is used for the incoming music source audio

stream. The codec you enter here must match the codec used by

the IP Music source.

Default: G.711 U-Law

Frames per packets The number of audio frames per RTP packet. The number of

frames you enter must match the number of frames per packet

sent from the IP Music source.

Default: 3

RTP port on BCM The number of the destination port used for the music source.

This is the port BCM uses to send music to the users.

Default: 2218

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 223 224

Sin comentarios

Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario Pagina 124