Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario descargar pdf (Pagina 134)

134 BCM 5.0 main unit testing

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

BCM 5.0 main unit testing navigation

• Testing the main unit (page 134)

• Troubleshooting the main unit (page 134)

Testing the main unit

If you have the digital station MBM installed in the main unit, use the following

test to ensure the BCM main unit is operating properly.

Attention: As BCM50 does not have MBM in the core system, it should be

added to BCM50 with keycode-enabled expansion cabinet.

Procedure steps

Step Action

1 Go to an extension that is connected to a digital station MBM on the main

unit.

2 Check for a dial tone.

3 Use this extension to make a call to another extension on the system.

4 If this system has an expansion unit with a media bay module (MBM) that

supports extensions, repeat step 1 to step 4 for an extension connected to

the expansion unit.

5 Go to an extension that has access to one of the lines on the main unit.

6 Select the line or line pool to which the line belongs.

7 Check for a dial tone.

8 Make a call using the line or line pool.

9 If this system has an expansion unit with an MBM that supports lines, repeat

step 5 to step 8 with an extension that can access one of the lines

connected to the expansion unit.

--End--

Troubleshooting the main unit

Troubleshoot the BCM main unit if the main unit is not functioning properly.

Prerequisites

• Test the BCM main unit for proper functionality. For more information, see

Testing the main unit (page 134).

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 223 224

Sin comentarios

Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario Pagina 134