Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario descargar pdf (Pagina 28)

28 BCM 5.0 system configuration preparation

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

• The DHCP server on the main unit is enabled (IP Phones only) by default.

If your network already contains a DHCP server, disable the DHCP server

on the main unit.

Procedure steps

Step Action

1 Connect one end of the Ethernet cable to your LAN.

2 Plug the other end of the Ethernet cable into one of the available two LAN

ports on the BCM 5.0 main unit (two right-most ethernet ports).

The OAM port does not support VoIP devices.

--End--

Accessing the BCM Web page

After you connect your computer to the BCM system, you can download

Business Element Manager from the Administrator Applications area of the

BCM Web page.

Prerequisites

• Ensure you connect your computer to the BCM system, either through the

OAM port or through a LAN connection.

Procedure steps

Step Action

1 Open a Web browser and enter the BCM system IP address:

• If your BCM 5.0 is installed on a network, type the address on the

network in the form, http://xxx.xxx.xxx.xxx.

• If your BCM 5.0 is installed but not yet configured, connect directly to

the BCM 5.0 through the OAM port and type, http://10.10.11.1

The Enter Network Password dialog box appears.

2 Enter the user name and password (defaults are shown):

• User name: nnadmin

• Password: PlsChgMe!

3 Click OK.

The Welcome to BCM Web page appears.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 223 224

Sin comentarios

Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario Pagina 28