Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario descargar pdf (Pagina 60)

60 BCM 5.0 configuration with Business Element Manager

Nortel Business Communications Manager 5.0

Configuration — System

NN40170-501 02.04 Standard

September 2009

4 Click Delete.

A confirmation message appears.

5 Click Yes.

--End--

Configuring SNMP trap destinations

An SNMP trap is a signal that tells the SNMP manager that an event has

occurred on the system. The SNMP system enables SNMP traps to be

generated based on all or some events and alarms generated on the BCM 5.0

system. Any information that is displayed in the Alarms panel can generate an

SNMP trap.

BCM 5.0 alarms that meet the SNMP trap criteria are forwarded to the SNMP

trap reporting interface according to defined trap community strings. SNMP

trap notifications are displayed in your SNMP trap software.

SNMP traps are generated by the BCM 5.0 if you have enabled SNMP for

specific BCM 5.0 alarms. You configure SNMP settings using the Alarm

Settings task in the Business Element Manager.

Attention: You can configure and administer SNMP trap destinations in

both the Configuration tab and the Administration tab of the Business

Element Manager. This allows operators who manage BCM 5.0 faults to

configure SNMP trap destinations without having to access the SNMP

settings on the Configuration panel. SNMP must be enabled on the SNMP

General panel if you want to configure and use SNMP trap destinations from

the SNMP Trap Destinations panel on Administration panel.

Procedure steps

Step Action

1 Select Configuration > Administrator Access > SNMP.

2 Select the SNMP Trap Destinations tab.

The SNMP Trap Destinations tab appears.

3 Click Add.

The Add Trap Destinations dialog box appears.

4 Configure the Add Trap Destinations attributes.

5 Click OK.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 223 224

Sin comentarios

Avaya Business Communications Manager 5.0 - Configuration - System Manual de usuario Pagina 60